SHEMAX PROFESSIONAL UV/LED LAMP WITH COOL BEAM TECHNOLOGY ^Sale

DESCRIPTION
SHEMAX Lamp is a professional UV/LED lamp with a battery and Cool Beam technology, designed for comfortable, fast, safe polymerization of any gel coatings. Cool Beam works due to narrowly focused UV/LED radiation in a safe spectrum, which polymerizes the coating without excessive thermal exposure to the skin.

Equipped with 36 powerful LED diodes with a safe spectrum (365–405 nm) and an intelligent Smart 2.0 system that protects against overheating. The mirrored inner surface allows you to evenly dry all your fingers. The display with a timer and time selection function (30, 60, 90 sec.) allows you to flexibly adjust the parameters.

SHEMAX Lamp has a built-in 7800 mAh battery that works continuously for up to 5 hours without connecting to the network. The motion sensor automatically turns on the device when you raise your hand, and the display shows the countdown and charge level, which is especially convenient for mobile craftsmen.

The case is made of aluminum alloy and impact-resistant polycarbonate, with a built-in handle for moving. The removable metal tray simplifies hygiene, allows you to use the lamp for hands and feet.

UV/LED lamp SHEMAX Lamp - features:

Cool Beam technology does not cause burning;
36 LED diodes;
power - 72 W;
safe wavelength (365-405 nm);
mirror surface;
with display;
timer for 30/60/90 sec;
battery 12.6V Li-Ion, capacity - 7800 mAh;
up to 5 hours of continuous operation without connecting to the network;
voltage - 110-240 V;
current frequency - 50-60 Hz;
power supply — 2A;
motion sensor;
material — aluminum alloy, impact-resistant polycarbonate;
removable tray;
built-in handle;
dimensions — 31.5x27.5x10.5 cm;
weight — 1.96 kg;
color — white with black.

How to use SHEMAX Lamp:

Connect the charger to the connector on the lamp and plug it into the outlet. For wireless use, make sure that the battery is charged. The charge level is displayed on the display.
Press the power button. Information about the device status will light up on the display.
Use the touch buttons to set the timer for 30, 60 or 90 seconds — depending on the material used.
The lamp turns on automatically thanks to the built-in infrared sensor. Start the timer manually with the button if necessary.
During polymerization, a countdown will be displayed on the screen. It will turn off automatically after the session.
For pedicure, remove the metal tray, position the lamp so that it is comfortable for your feet.
After finishing work, turn off the device. Wipe the case and tray with a soft damp cloth. Do not use abrasive products.
When the charge level is low, connect the power adapter.

Package contents:

lamp;
charger;
AC/DC adapter;
operating instructions.